Warning

This is a design page. It was used to design and discuss the initial implementation of the change. However, the state of this document does not necessarily correspond to the current state of the implementation since we do not keep this document up to date with further changes and bug fixes.

Using the Global Catalog to speed up lookups by ID

https://pagure.io/SSSD/sssd/issue/3468

When SSSD is connected to a forest with multiple domains, each lookup, unless qualified with the domain name, iterates over all the domains. Moreover, some lookups, such as by-ID cannot be qualified using the NSS interface at all.

This means the SSSD will issue N LDAP searches for N domains. If the object SSSD is searching for exists in the LDAP database in one of the domains, the performance impact can be mitigated with the already existing option cache_first, which will, even for non-qualified searches, first check if the requested object exists in the local database and if it does, searches the corresponding domain only.

But this option doesn’t solve the problem of looking for objects, especially numerical IDs, that do not exist in the remote database at all. A search for such non-existent object will always traverse all the domains every time the negative cache from a previous request expires.

In environments that use the Global Catalog, this issue can be mitigated by locating the object’s domain in the Global Catalog, provided that the search key is present in the Global Catalog in the first place.

Currently the primary use-case is SSSD joined to an AD forest consisting of multiple domains and configured with id_provider=ad, because only the AD provider supports Global Catalog lookups. There are some plans to implement the Global Catalog e.g. for FreeIPA, but so far no implementation exists.

At the same time, only environment that use POSIX UID and GID attributes set by the administrator will benefit from this enhancement, becase if the client maps the IDs algorithmically from the SIDs, the AD provider is already able to shortcut the by-ID request after computing the SID from the requested ID and realizing that the domain SID does not come from the current domain.

The Global Catalog is an LDAP database, which contains a subset of attributes about objects from all the domains in the whole forest. What attributes are replicated to the Global Catalog is defined by the Partial Attribute Set. It is possible to query for the attributes that are replicated to the Global Catalog using an LDAP query based in the cn=schema,cn=configuration subtree and check for the presence of isMemberOfPartialAttributeSet=TRUE, for example:

ldapsearch -Y GSSAPI \
           -H ldap://dc.win.trust.test:389 \
           -b cn=schema,cn=configuration,dc=win,dc=trust,dc=test \
           '(&(objectClass=attributeSchema)(isMemberOfPartialAttributeSet=TRUE))'

It is important to note that because the POSIX attributes such as uidNumber or gidNumber are neither part of the default Active Directory schema, nor replicated to the Global Catalog by default. To learn how to extend the schema to set the POSIX attributes at all, follow the Install Identity Management for UNIX Components article on the Microsoft TechNet site. How to extend the Partial Attribute Set is described for example in the AD DS: Global Catalogs and the Partial Attribute Set TechNet blog post.

The purpose of using the Global Catalog in SSSD is two-fold:

  • to avoid having to connect to the LDAP server of a DC from every domain in the forest

  • to look up the cross-domain members of Universal Groups, which are only present in the Global Catalog

Because not all the attributes required by SSSD are guaranteed to be replicated to the Global Catalog (especially the uidNumber and gidNumber attributes), SSSD runs a search that checks for the presence of any objects with either uidNumber or gidNumber during the very first request for a numerical ID. If no objects with either attribute are present, the Global Catalog support is disabled except for looking up Universal Group members.

However, at the moment, SSSD will either use whole entry it finds in the Global Catalog or not use the Global Catalog at all. This puts a bit of responsibility on the administrator in the sense that the object in the Global Catalog must contain all the required entries or the administrator might need to disable the Global Catalog support manually in the configuration file. In the future (see e.g. ticket 3538 RFE: Use the global catalog only to look up the entry DN) we would like to change the logic so that it uses the Global Catalog to look up the entry DN, but then it would look up the entry attributes in the LDAP directory of the object’s domain. However, that enhancement is out of scope of what this design page describes.

A new Data Provider method getAccountDomain() whose purpose is to locate a domain an object resides in will be added. At the moment, only the AD provider will implement this handler.

The responder’s cache_req module will call this handler before iterating over domains. For all domains except the one returned from the handler, the cache_req module will set the requested object into negative cache. This would cause the subsequent loops over the domains to just skip the domains where the entry was not found and only look up the entry in the domain that the getAccountDomain() method returned.

There are two parts to the implementation - the responder side, which mostly touches the cache_req code and the provider side. The responder side would also require adding some API to the negative cache module.

On the responder side, the ability to locate a domain of a requested object will be provided by new cache_req plugin methods. Not all plugins will be augmented with the methods that call the domain locator - at least in the first iteration, only the plugins that search objects by ID will use the new Data Provider API.

When looking up an entry, the cache_req request must first decide whether it is worth calling the domain locator request at all. The locator request should only be called when there are multiple domains to search and the request is not already qualified with a domain name. Similarly, the domain locator should not be called if the request is only evaluating the cached data (bypass_dp=True, which is typically set during the first pass when the cache_first option is enabled). Of course, the locator would also only be called for plugins that implement the associated methods.

When all the above evaluates into calling the locator (e.g. searching a user UID while multiple domains are defined), the first step before actually calling the locator DP method should still be looking into the cache. This additional step ensures that looking up an ID from the first defined domain in a setup with many domains wouldn’t needlessly hit the Global Catalog, while the entry is still cached in sysdb.

Finally, the responder would call the getAccountDomain Data Provider method. If calling the DP method returns an error, this error is in no way fatal, but instead, the cache_req code resumes the original codepath where all domains are searched sequentially. One error code that signifies that the back end as a whole doesn’t support locating ID’s domain must be added. When the cache_req code would receive this error code, it would never call the domain locator again for this domain.

On returning success from the getAccountDomain method, the string returned from the method will contain the domain where the ID was found. Only one domain can be returned, conflicting values in the ID space will be detected on the provider side and handled by returning an error, which will fall back to the sequential lookups.

The returned domain name will be used to set a negative cache entry for the looked up object in all domains except the one that was returned. It is important to only mark (sub)domains that belong to the same “main” domain with these negative cache entries, especially because internally in the cache_req code, we use a flattened domain list to iterate over in order to support custom domain lookup priorities. After this is done, the cache_req code would loop back into its original logic, but the negative cache entries will ensure that domains that do not contain this ID are skipped.

Because the loop over domains is resumed only after the locator was called, there needs to be a way to avoid calling the locator too often. To this end, a new negative cache container would be added. Under this container, we will store the values of the objects we look up to notify the cache_req code that either the locator must be called again or that calling the locator can be skipped this time and the per-domain-per-ID negative cache entries can be reused again during the loop over domains.

All providers except id_provider=ad will set a dummy getAccountDomain handler which always returns ERR_GET_ACCT_DOM_NOT_SUPPORTED. Therefore, for all domains except the ones with the AD provider, the getAccountDomain method will only be called once and then disabled.

The AD provider implementation of the getAccountDomain method will search the Global Catalog with an empty search base, thus searching across all the domains in the forest. Two details are important to bring up with respect to this search:

  • In order for this lookup to be useful even for non-existant IDs, the Global Catalog search must be “authoritative”. In other words, not finding the entry in the Global Catalog must be considered as if the entry doesn’t exist.

  • Because the POSIX IDs are not replicated by default to the Global Catalog, the getAccountDomain request must check if any POSIX IDs at all are replicated to the Global Catalog at all.

None. However, it should be noted that disabling the Global Catalog support as a whole in SSSD would disable the getAccountDomain in the sense that it would always return ERR_GET_ACCT_DOM_NOT_SUPPORTED which would in turn instruct the responder to never call the getAccountDomain request again

Therefore, disabling the Global Catalog can be used to disable this new functionality.

To test the functionality itself, an AD forest with multiple domains should be used. Please make sure the POSIX attributes are present and replicated to the Global Catalog. Requesting a POSIX ID from domain outside the joined one should first consult the Global Catalog and then proceed to only searching the individual domain where the ID was located.

It is important to test that there are no regressions in setups that either do not use POSIX IDs at all or do not replicate the POSIX IDs to the Global Catalog. In these setups, as well as configurations that use a different ID provider, the cache_req code must only attempt to call the locator once.

Similarly, setups that use multiple domains (and remember that since Fedora-26, all SSSD installations automatically enable the files provider) must see no regressions.

  • Jakub Hrozek <jhrozek@redhat.com>